Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING THE HANDLEBAR
VERTICALLY.-
Position the handlebar (4) at a
comfortable
distance
exercise but without going beyond the
"MIN INSERT" marks, now tighten
knob (78-82) securely, Fig.5.
Important: This tensioning control
(110) is equipped with an emergency
braking system which, when applied
with force (as shown by the arrow in
Fig.8, produces a much sharper
braking effect.
7.- FITTING THE MONITOR.-
Place the monitor bracket (8) as
shown in Figure 6. With the screws
(11), washers (10) and spring washer
(9).
Take the monitor (1) and remove
the four screws (2) from the base of the
monitor, Fig.7.
Connect the terminal in terminal of the
rear part of the monitor (1) Fig.7, and
attach it using the four screws (2)
removed previously.
8.- ATTACHING THE BOTTLE
HOLDER.-
Take the bottle holder (80) along with
the two screws (81) and screw them
on to the side of the handrail Fig.9.
LEVELLING.-
Once the unit has been placed into its
final position, make sure that it sits flat
on the floor and that it is level. This
can be achieved by screwing the
adjustable feet (100) und (20) up or
down, as shown in Fig.10.
for
doing
11
MAINS CONNECTION.-
Insert the jack (c) on the transformer
into the connection hole (h) on the
main body (71) (bottom, rear of the
machine)
and
transformer (139) into a 230V mains
supply, Fig.11.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (22)
Fig.12, to make it easier to move. The
wheels located at the front of your unit
make it easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.12. Store your unit in a dry place,
preferably not subject to changes in
temperature.
MAINTAINING THE MACHINE.-
1.
For health reasons it is necessary
to clean the handlebars and seat after
each class with a disinfectant spray,
as well as removing any sweat from
the bicycle's frame.
2. CHECKING THE TIGHTENING
KNOBS.-
The 3 tightening knobs should be
loosened off and sprayed with a
lubricant to ensure that they remain
operative.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
then
plug
the
Publicidad
