5. Low battery indication
6. Indoor Temperature and
humidity
7. Max/min record of Indoor
temperature and humidity
8. Temperature Trend
9. Humidity Trend
10. Moon phase
11. "
12. " SET " button
Notes:
1.
The default year is 2020, if the weekday display is incorrect .
Please confirm year was set correctly. (for manual setting only)
2.
The CR2032 cell battery is for memory function (included).
Please do not used as power supply. If you need to replace the
cell battery, please take out the part device as shown in the
figure below, load new battery matching the polarity(+and-).
Pick out
" button
16. " RCC " button
Enter into RCC setting
17. " MEM " button
Check or clear Max/min
record
18. Stand bracket
19. Hanging Hole
20. Battery Compartment
Positive
pole
4