Manual Settings - BALDR B0359STHR Manual Del Usuario

* RCC symbol display:
a. When receiving signal , RCC icon will be flashing by"1HZ".
b. When signal successfully received, LCD will display
complete RCC icon and exit RCC receiving.
c. If no signal is received, the RCC icon will disappear.
Tip:
please put the product close to the window to enhance the
reception of RCC signal.

Manual Settings

1. After signal received, if there is no need for other settings, you
can just finish reading here. If there is other setting require-
ments. Please check the following steps. Or if there is no signal
received, you can follow bellow steps for manual setting.
2. Press and hold " SET " button to enter into setting, press
" SET "button to skip setting steps or go to the next setting
option.
*Tips: press and hold "▲" or " ▼" button will quickly
change the value by 8 steps.
3. Press " SET " to select Weekday Language. Default
setting :GER. Press the "▲" or "▼" button to select languages:
GER/ENG/ITA/FRE/DUT/SPA/DAN optional .(German/En-
glish/Italian/French/Dutch/Spanish/Danish)
4. Press " SET " to select the RCC. Default setting : ON. Press
"▲" or "▼" button to select OFF or ON.
5. Press " SET " to select Time Zone. Default setting : 0. Press
"▲" or "▼" button to select time zone from -12 H to + 12 H.
6. Press " SET " to select 12/24H Time Format. Default setting :
24 H. Press the "▲" or "▼" button to select 12H or 24H.
7. Press " SET " to select Hours. Press "▲" or "▼" button to
adjust the value.
7