Power Over Ethernet (Poe) - Vivotek SUPREME FE9381-EHV Guía De Instalación Rápida

Power over Ethernet (PoE)

When using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ether-
net cable. Follow the below illustration to connect the Network Camera to a PoE-enabled switch via
Ethernet cable.
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a non-PoE switch.
NOTE:
1. This equipment is only to be connected to PoE
networks without routing to outside plants.
2. For PoE input connection, use only UL listed I.T.E.
with PoE output.
EN - 8
PoE Switch
PoE Power Injector
(optional)
Non-PoE Switch