Care And Cleaning - AVS Ventshade Deflector Instrucciones De Instalación

Installation Steps
Apply included tape tabs to the deflector edge as
NOTE: the tape tabs are wider than the flange of the
deflector. Align the tape so that one edge is flush with
the inner edge of the deflector.
9
Pull the deflector flush with the post. Pull the deflector
firmly outwards so that the tape adheres securely. Us-
ing the hole in the deflector as a guide, centerpunch
and drill a 1/16" hole.
11
Replace rubber window channel and raise window to fully seat
window channel.
rubber window channel
13

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
shown.
hole
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2006 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Carefully peel back the tape liner off of the tape tabs.
10
12
Repeat Steps 1-13 for remaining windows
logo are trademarks of Lund International, Inc.
TM
Page 3 of 3
Insert (1) screw.