Kicker CX.1 Serie Manual Del Propietário página 2

MODEL:
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
PERFORMANCE
Model:
RMS Power
@ 14.4V, 4Ω mono,  1% THD+N
@ 14.4V, 2Ω mono,  1% THD+N
Length | in [mm]
Specifi cations common to all models:
Height | in [mm]
Width | in [mm]
Frequency Response ± 1dB
Signal-to-noise Ratio
Input Sensitivity
Electronic Crossover
Bass Boost
Subsonic Filter
Remote Bass
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use
genuine KICKER accessories and wiring.
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items
behind the area where the screws will be driven. Choose a location that allows at least 4" (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill
four holes using a 7/64" (3mm) bit and use the supplied #8 screws to mount the amplifi er.
The KICKER CX Amplifi ers are capable of space-saving vertical mounting. Use a 2.5mm hex key (Allen wrench)
to loosen the endpanel, remove the existing brackets, then insert and tighten the double-slotted brackets to the
amplifi er as illustrated on the next page.
2
2012 CX Mono Amps Rev I.indd 2 2012 CX Mono Amps Rev I.indd 2
All manuals and user guides at all-guides.com
CX.1-SERIES AMPLIFIERS
OWNER'S MANUAL
CX300.1 / CX600.1 / CX1200.1
CX300.1
150W x 1
300W x 1
8-1/8 [210]
2-3/8 [60]
7-3/16 [180]
25Hz–200Hz
>95dB, A-weighted, re: rated power
Low Level: 125mV–5V
High Level: 250mV–10V
Variable Lo-pass 50Hz–200Hz, 12dB/octave
Variable 0–12dB @ 40Hz
25Hz, 24dB/octave
Yes [sold separately]
CX600.1 CX1200.1
300W x 1 600W x 1
600W x 1 1200W x 1
8-1/8 [210] 12-1/16 [310]
6/22/2012 2:32:28 PM 6/22/2012 2:32:28 PM