1. The buzzer alarm can be set either when the radio is
on or off.
2. Press and hold the buzzer alarm button
symbol and the display hour will flash along with a
beep.
3. During buzzer alarm symbol
Tuning control knob
to select the hour and press
Tuning control knob
again to confirm hour setting.
Then rotate the Tuning control knob
minute and press Tuning control knob
minute setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
Press the Tuning control knob
setting.
Note:
There is no volume adjustment for buzzer alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power button
.
Disabling/cancelling alarms
To disable an active alarm, either press the Power button
, or press and hold the corresponding alarm button
to cancel the alarm.
Snooze
1. When the alarm sounds, press any button other than
the Power button
will silence the alarm for 5
minutes. "SNOOZE" will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button
setting.
3. Rotate the Tuning control knob
appears on the display, then press the Tuning control
knob
to enter the setting. Rotate the Tuning control
knob
to adjust the silence time from 5, 10, 15 and
20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button
Sleep Timer setting. "SLEEP XX" will show on the
display.
2. Keep holding the Power button
Timer options will start switching on the display. Stop
until the desired Sleep Timer setting appears on the
, the
display. The setting will be saved and the LCD will
return to normal display.
3. Your radio will switch off automatically after the preset
flashes, rotate
Sleep Timer has elapsed. The Sleep Timer
will show on the display indicating an active Sleep
Timer.
to select the
to confirm
4. To cancel the Sleep Timer function before the preset
time has elapsed, simply press the Power button
Loudness
You can get compensation on lower and higher frequency
for your radio by adjusting the loudness function.
1. Press and hold the Menu/Info button
menu setting.
to confirm the
2. Rotate the Tuning control knob
"LOUD OFF" appears on the display. Press the Tuning
control knob
3. Rotate the Tuning control knob
turn on the loudness function, then press the Tuning
control knob
4. To turn off the loudness function, select OFF and press
the Tuning control knob
AUXILIARY INPUT SOCKET
A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
1. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket.
2. Press the Power button to switch on your radio.
3. Repeatedly press and release the Source button until
"AUX1" is displayed.
to enter the menu
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
until "SNOOZE X"
audio device and then adjust the volume on the radio
as required.
Note:
Audio cord is not included as standard accessories. AUX
can't be activated as alarm source.
.
Listening to Bluetooth
music
You need to pair your Bluetooth
before you can auto-link to play/stream Bluetooth
through your radio. Paring creates a permanent "bond" so
to enter the
two devices can always recognize each other.
12 ENGLISH
to turn the unit off manually.
until "LOUD ON" or
to enter the setting.
to choose ON to
to confirm the setting.
to confirm the setting.
®
device with your radio
and the Sleep
icon
to enter the
®
®
music