Features
Press OK button on the remote control to select
the adjusted item.
1. Play or pause
2
3. Display previous text
4. Display next text
Press EXIT to return to the previous menu.
Using an external USB
drive for recording
Note
The system will format the whole device. If your
device size is bigger than 1GB, you can set the
size which is used for time shift.
If you set the entire capacity for time shift, you
will not be able to record anything.
You will only need to format the device the first
time you use it to record something.
The recommended minimum capacity for
recording is 1GB.
Bit rate:
• Device bit-rate>5MB/s REC is safe.
The system cannot work normally if the USB
device has one of the following issues:
• The device has bug.
• The device has an error block.
;
• The device does not accurately report capacity
available.
IMPORTANT
• The USB device should be formatted to FAT32
using a PC before being inserted into the USB
connector.
EN-25 Digital LED LCD television user's manual
25 Digital LED LCD television user's manual
Digital LED LCD television user's manual
All manuals and user guides at all-guides.com
Time Shift
Stop
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the programme. Press PLAY/
PAUSE again to restart the programme with time shift. If
you want to stop time shift, press STOP.
You can stop the time shift programme from being
played by pressing STOP.
Recording
Insert the USB device with FAT32 format into the
USB connector.
Press PLAY/PAUSE to start timeshifting.
Press RECORD
to record the programme being
played
and press EXIT to minimise the recording
interface.
>@
ILYH 7KH VWUHHWV RI 6$1 )UDQFLVFR 0%
Press STOP to stop the programme recording from
being played.
To play the recorded programme: Select input
source USB to open pvr folder.
Select the content you recorded.
Press
OK to play the recorded programme and press
STOP to stop it.
5(&25'