Federal Signal 3TLD-02 Instrucciones De Instalación página 10

5
LED Warning Lights
To clean the dome:
1. Rinse the dome with lukewarm water to loosen dirt and debris.
2. Use a mild soap, lukewarm water, and a soft cloth to gently clean the plastic surfaces. To avoid
damaging the dome, do not use heavy pressure or caustic, abrasive, or petroleum-based cleaners.
3. Rinse the dome and dry it with a soft cloth to prevent water spotting.
To remove fi ne scratches and haze, use a specialty plastic cleaner/polish and a soft cloth. You can also
use a high quality automotive paste cleaner/wax that is non-abrasive.
3TLD-02
Figure 2 Model dimensions
3TLF-02 3TLP-02