Mappy UltiS559 Guía De Inicio página 19

17. Fitting the car stand
Attach the suction pad to the car
stand, as shown opposite.
Remove the protective film, attach
the suction pad to the windshield
and lock it into its base. For a
stronger hold, clean the glass
before attaching the suction pad.
Place the product on the lower part
of the stand. Next, as shown in the
illustration, push the device back
into the car stand.
Once you have finished installing
the device in the car, turn on the
engine.
Connect the device with the
cigarette lighter cable. Connect the
cigarette lighter cable to the
cigarette lighter outlet in your car.
Press the power button on the device. When the device turns on, you
will be taken to the home screen where you can access various
functions.
:
Warning Install the car stand where it does not interfere with driving, obstruct the
driver's vision, or deploy the airbags.
18