Sauder Original Cottage 414686 Manual Del Usuario página 7

3 3
These edges
should be even.
Turn four BLACK 9/16" FLAT HEAD SCREWS (32S) into the ENDS (A and B) until the shoulder of the SCREWS rest on the
surface of the ENDS.
Slide the SIDE MOLDINGS (L) onto the ENDS (A and B). Line up the groove in the MOLDINGS over the head of the SCREWS in
the ENDS.
414686
B
L
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
www.sauder.com/services
Apply pressure with your hands as
you guide the MOLDINGS over
the SCREWS and onto the ENDS.
A
Shoulder
32S
L
Page 7