Metal Bracket; Black 9/16" Large Head Screw; Black 7/8" Large Head Screw - Sauder Original Cottage 414686 Manual Del Usuario

10 10
4G
Use this
groove.
19G
(4 used)
Use the
center hole.
Fasten four LARGE METAL BRACKETS (19G) to the ENDS (A and B) and two METAL BRACKETS (4G) to the BOTTOM (D).
Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the SKIRTS (I) to the ENDS (A and B) and BOTTOM (D). Use six BLACK 9/16" LARGE HEAD SCREWS (1S) through the
METAL BRACKETS and into the SKIRTS.
NOTE: There are no pre-drilled holes in the SKIRTS. The SCREWS will tighten into the groove.
Page 14
(2 used)
I
A
19G
www.sauder.com/services
19G
B
D

BLACK 9/16" LARGE HEAD SCREW

(12 used for the METAL BRACKETS)
Use the
center hole.
19G
I
4G
1S
414686