Kohler CORALAIS K-15175 Instrucciones De Instalación página 2

S
For faucets with handspray:
Apply a bead of plumbers putty or
other sealant to the underside of
the spray escutcheon according to
the putty manufacturer's
instructions. Insert the spray
escutcheon into the sink hole.
Handtighten the nut to secure the
spray escutcheon in place.
S
Insert the handspray hose into the
spray escutcheon, and connect
the hose to the hose supply tube.
Carefully tighten the hose
connection, but do not
overtighten.
IF THE SINK IS NOT INSTALLED, INSTALL IT AT THIS TIME. BE
SURE TO FOLLOW ALL INSTRUCTIONS PACKED WITH THE
SINK.
Identify your supply connection
type. Connect the supply hoses to
the supply stops. (Left is hot – right
is cold.)
Tighten all connections.
S
Connect the tailpiece and P-trap.
S
Ensure that all connections are
tight.
S
Remove the aerator.
S
Open the drain.
S
Turn on the main water supply
and check for leaks.
S
Open the valve and run water
through the spout to remove any
debris. Turn the valve off.
S
Reinstall the aerator.
1002236 2
B
Handspray
Spray Escutcheon
Apply Plumbers
Putty
Inlet
Hoses
Hose
Supply Handspray Hose
Tube
Supply
Hoses
Supply
Stop
Aerator
2
Kohler Co., Kohler, WI U.S.A.
Sink Hole
Nut
Spout