Uline Н-7234 Manual Del Usuario

H-7234
METAL TERRACE
RECEPTACLE
TOOL NEEDED
3/16" Allen Wrench x 1
(Included)
5/16-18 x 1¼" Cap Screw x 4
1. Verify all parts are present before beginning.
Hardware is located with the lid.
2. Place the lid on the top of the base aligning the
predrilled holes. (See Figure 1)
Figure 1
PAGE 1 OF 3
1-800-295-5510
uline.com
Flat Washer x 4
ASSEMBLY
PARTS
Lid x 1
3. From the outside of the base fasten one flat washer
and one cap screw through the base into the lid
until tight. Repeat for all four corners. (See Figure 2)
Figure 2
Para Español, vea página 2.
Pour le français, consulter la page 3.
Base x 1 32 Gallon Rigid Liner x 1
0421 IH-7234