Bellavita drive Instrucciones De Uso página 10

Installation and use
4. Now insert the drive unit with integrated back-
rest into the bearing blocks of the seat unit
(see illustration).
➤
Attention! It is very important that both
guide pins are inserted into the bearing
blocks!
2
 Bearing block ·  Guide pin
Please make sure that the red stop lever is in
the correct position.
8 · English
5. Now hold the backrest at the hand grips and
using the other hand tilt it backwards (see
illustration) until the drive unit rests against
the baseplate.
1
 Hand grip
1
≈