Troubleshooting; Notes Concerning The Disposal; Re-Use/Recycling - Bellavita drive Instrucciones De Uso

◗

Troubleshooting

Error
Lift does not move
Lift stops repeatedly
Battery does not charge
Hand control does not
function correctly
➤
Important remark concerning troubleshooting:
If it is not possible to operate the bathlift despite observing all of the above-mentioned information,
please contact the specialist dealer who sold the device.
◗

Notes concerning the disposal

The disposal and re-utilisation of old devices and
equipment has to be in compliance with the rele-
vant legal stipulations.
Devices subject to the Regulations concerning
electrical and electronic devices (elektroG) are
listed as medical products for professional users
B2B in the register of the foundation "elektro-Alt-
geräte-Register".
Our registration number is DE 33275322
Possible cause
• Battery is flat
• Contacts on hand control
are contaminated
• Hand control is not
connected properly
• Battery is flat
• Excessive lifting load
• Jack plug not fully plugged
• Not connected to mains power
• Contaminated contacts
• Jack plug not plugged in fully
◗

Re-use/Recycling

This product is suitable for re-use. The number of
re-uses depends on the condition of the product.
The manufacturer's instructions have to be fol-
lowed for re-cycling. If necessary, these instruc-
tions will be made available on request.
Appendix
Remedy
– Charge battery
– Unplug hand control; wipe
contacts with a dry cloth and
plug hand control in again
– Check plug-type connections
– Charge battery
– Reduce lifting load (note max.
load ratings, see type label on
the bathlift)
– check jack plug connection
– Connect battery charger
to mains power
– Wipe contacts with dry cloth
– Ensure jack plug is fully
plugged in
English · 21