Bellavita drive Instrucciones De Uso página 17

3. Make absolutely sure that the lifting rod is
always retracted completely.
correct
4. Now the drive unit can be removed from the
seat unit in the direction of the arrow (see illu-
stration).
➤
Note: The drive unit can only be removed
at a specific angle. When it is completely
folded down and locked, it can not be
removed from the seat unit. Bring the
backrest into the position shown in our
illustration; then remove the drive unit in
the direction of the arrow.
5. Remove the two rear suction cups by pulling
the tongues. Then lift off the rear part of the
baseplate. This action will loosen the front
suction cups, which are self-venting. The seat
unit can now be removed from the bathtub.
✓
incorrect
Installation and use
English · 15