PNI VOYAGER S1250 Manual Del Usuario página 10

Display auto off
EN
Infrared light
Frequency
License No set
To set the car license number, select "License No set".
Press Mode key to set the license plate number, use Up/Down buttons to
browse letters/numbers, press OK button to confirm.
Repeat procedure for the rest of the plate number characters.
Select "OK" using Mode key, then press OK button to confirm.
Note: The car plate number will be shown on the display above the date
and time, and it will be stamped on the recorded files.
Adjust the turn off screen time out timer.
Activate / Deactivate night mode
50 Hz or 60 Hz
Select to set the car plate number.
10