Urmet 1093 Manual De Usuario página 29

INSTALLATION
1. Before installation, make sure that all devices to be connected are not powered.
2. Place the bracket base on the supporting surface to mark the 4 fixing holes. Consider the position of
the slot placed on the bracket, used for the passage of the cable (see photo). Use the base as drilling
template.
3. Fix the camera to the base using the 4 screws and the provided suitable spanner, taking care to place
the cable on the seat present in the bracket, in order to avoid pinching the cable.
4. Place the bracket in a position suitable for shooting the selected images; the telecamera can be
adjusted on the HORIZONTAL and VERTICAL axis.
HORIZONTAL ADJUSTMENT
Loosen the ring on the bracket and the adjusting screw shown in the figure.
•
put the bracket in horizontal position
•
point the camera at the desired position
Once the adjustment has been performed, tighten the screw and the ring by locking it with the grub
screw and the suitable spanner (provided).
DS 1093-083
All manuals and user guides at all-guides.com
ADJUSTING SCREW
HOLES FOR FIXING THE CAMERA
TO THE SUPPORT
29