Urmet 1093 Manual De Usuario página 47

LANGUAGE
The menu language is only English.
DEFECT – PIXELFIXING
This function allow to repair CCD single pixels under low light condition, reducing the brightness of the too
bright pixels.
This function is for experienced users
Select this option to access the following submenu:
LIVE DPC
LEVEL
STATIC DPC
START
LEVEL
SENS-UP
RETURN
Option
LIVE DPC
LEVEL
STATIC DPC
START
LEVEL
SENS-UP
RETURN
START – START OF PIXEL FIXING
This function allow to repair CCD single pixels under low light condition, reducing the brightness of the too
bright pixels.
Press the button "ENTER", the message "CLOSE THE IRIS THEN PRESS ENTER KEY" will be displayed.
Cover the lens with a black lid to prevent light from passing through.
Make sure the image is totally dark and not to cover the light sensor (CDS), in order the leds are not turned
on (if leds are turned on, they become red).
Press again the button "ENTER", the message "Processing now....." will be displayed and the
compensation process will start. After few seconds, the menu will go back to the previous level. If the
camera doesn't go back to the previous menu level (because it has not been totally darkened or because
leds were on), switch off and switch on the camera and repeat the operation.
DS 1093-083
All manuals and user guides at all-guides.com
DEFECT
ON
■■■■■█■■■30
ON
■■■■■█■■■40
X8
RET
Value
ON ÷ OFF
This option allows to define the level of changes operated
0 ÷ 60
ON ÷ OFF
/
This option allows to define the level of changes operated
0 ÷ 60
X2 ÷ X60
RET
Description
This option allows to operate on dynamic pixels.
on dynamic pixels.
This option allows to operate on static pixels.
This option allows to start the procedure.
on static pixels.
This option allows to define the dynamic level of
operation.
This option allows to quit the menu.
47