Safety Notes; Important Notes; Functions - marklin BR 05 Manual Del Usuario

Safety Notes

• This locomotive is to be used only with an operating
system designed for it (Märklin AC, Märklin Delta, Märklin
Digital or Märklin Systems).
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one transformer.
• Pay close attention to the safety notes in the instructions
for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
10
All manuals and user guides at all-guides.com

Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
• Address set at the factory: MM 05
• Setting the locomotive parameters (address, accelerati-
• Headlights, changing over with the direction of travel.
• Various controllable functions.
• A smoke generator can be retrofitted to the locomotive -
• Only the train control functions and headlight changeover
• Mode of Operation: Locomotive Engineer
• Additional explanations about the mode of operation can
General Note to Avoid Electromagnetic Interference: A
permanent, flawless wheel-rail contact is required in order
to guarantee operation for which a model is designed. Do
not make any changes to current-conducting parts.
Name set at the factory: 05 003 F-ZUG DB
on/braking delay (ABV), maximum speed):
with the Control Unit, Mobile Station, Central Station.
also for analog operation.
feature are available in analog operation.
be found in the supplemental instructions (included).