Setting Up Your Machine; Power/Light Switch - Singer One Plus Manual De Instrucciones

SETTING UP YOUR MACHINE

Be sure to wipe off any surplus oil from
needle plate area before using your machine
the first time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord into
the cord socket (1) and your wall outlet (2)
as illustrated.
Connect the foot control plug (3) into the
machine socket.
NOTE: W h e n f o o t c o n t r o l i s
disconnected, the machine will not
operate.

POWER/LIGHT SWITCH

Your machine will not operate until the
power/light switch is turned on. The same
switch controls both the power and the light.
When servicing the machine, or changing
needles, etc., machine must be disconnected
from the power supply.
10
1
Pin plug
Butée
Conector
Always disconnect the machine from power
supply by removing the plug from the electrical
outlet.
Power/light switch "OFF"
Interrupteur moteur/lumière
« Fermé » (OFF)
Interruptor corriente/luz "OFF"
Set power/light switch at "OFF"
Mettez l'interrupteur moteur/
lumière à la position « Fermé »
Poner el Interruptor de corriente/luz
en "OFF"
Machine socket
Prise du cordon
de la machine
Conector de la máquina
Power line cord
3
Cordon d'alimentation
Cordón de la linea eléctrica
Foot control
Rhéostat
Control por pedal
Power/light switch "ON"
Interrupteur moteur/lumière
« Ouvert » (ON)
Interruptor corriente/luz "ON"
2