Transport, Packaging And Storage; Inspection After Transport; Packaging; Storage - Casselin CFIV8 Manual Del Usuario

The user of the induction equipment must be devoid of (do not carry with you) any accessories that may
be affected by magnets, magnetic fields and induction such as rings, watches, necklaces, etc. The list is
not exhaustive.
Ensure that the splashback and surrounding area are free of metal surfaces.

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection after transport

Checking for the absence of damage and the integrity of the device must be carried out upon receipt of the
package. In the event of identification of damage due to transport, refuse or accept the delivered product only
with reservations *. A complaint detailing the defects observed must then be made. The collection of damages
is only possible in the event of a complaint formulated within the time limits, ie 24-48 hours at most.
* written on the correct paper or digital delivery of the carrier.

3.2 packaging

The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.

3.3. Storage

WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock greater than 2 months (general condition of the device and all the elements constituting
it)
• No material shaking
• Storage in a closed room and not outside.

4. EQUIPMENT CHARACTERISTICS

* Subject to change
Model
Capacity
Electrical data
Temperature
Basket dimension
Dimensions
Weight
CFIV8
8 liters
3500 W / 230 V / 50Hz-60Hz
From 60 ° C to 190 ° C
195 x 250 x 145 mm
290 x 482 x 412 mm
12Kg
EN