3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Verification of the absence of damage and the integrity of the device must be carried out upon receipt of the
package. In case of identification of damage due to transport, refuse or accept the product delivered only
under reserve*. A complaint detailing the defects observed must then be made. The perception of damages
is only possible in the event of a complaint formulated within the time limits provided, ie 24-48 hours at the
most.
*written on the right paper or digital delivery from the carrier.
3.2 Packaging
The packaging of the device must be kept in the event of a move, or for a return to the after-sales service.
The interior and exterior packaging must be completely removed before using the device. The standards in
force in your country concerning the protection of the environment must be respected before destroying the
packaging.
3.3. Storage
WARNING
The storage of the device in stock can be done but only in its original closed packaging.
Storage can be carried out under these conditions:
• Storage in a dry, non-humid place
• Sheltered from the sun
• Control of stock for more than 2 months (general condition of the device and all the elements that make it
up)
• No material shaking
• Storage in a closed room and not outside.
4. MATERIAL CHARACTERISTICS
* Subject to change
Model
CFEV7B
Capacity
Electrical data
3600W / 230V
oil tank
Temperature
from 60°C to 190°C
Basket sizes
W 205 x D 205 x H 140
Dimensions
W 280 x D 683 x H 456
Weight
CFEV72B
7L
2 x 3600W / 230V
1
from 60°C to 190°C
W 205 x D 205 x H 140
mm
W 570 x D 683 x H 456
mm
8kg
2 x 7L
3600W / 230V
2
from 60°C to 190°C
W 215 x D 315 x H 140 mm
mm
W 285 x D 745 x H 456 mm
mm
16kg
CFEV10B
10L
2 x 3600W / 230V
1
from 60°C to 190°C
W 215 x D 315 x H 140
W 587 x D 745 x H 456
10kg
EN
CFEV102B
2 x 10L
2
mm
mm
18kg