Philips SilentStar FC9309 Manual Del Usuario página 19

4222.003.3430.1.indd 19
All manuals and user guides at all-guides.com
- Hold the filter in such a way that the pleated side points upwards and
the water flows parallel to the pleats. Hold the filter at an angle so that
the water washes away the dirt inside the pleats.
- Turn the filter 180° and let the water flow along the pleats in opposite
direction.
- Continue this process until the filter is clean.
Never clean the washable filter with a brush.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
5 Carefully shake the water from the surface of the filter. Let the filter
dry completely for at least 2 hours before you put it back into the
vacuum cleaner.
6 Put the dry filter back into the appliance.
7 Fit the two lugs of the filter cover behind the ridge at the bottom
of the vacuum cleaner (1). Then push the filter cover towards the
appliance (2).
EngliSh
19
11-11-09 15:17