Operation And Handling; Tare Function; Selection Of The Weight And Size Units; Switch Off - CASO DESIGN Kitchen Ecostyle 3266 Manual Del Usuario

12 Operation and Handling

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages.
12.1 Weighing
Open and close the leg of the scales carefully and slowly until
displayed and thereby the capacitor is charged with dynamo
technology.
Place the scales on a hard & flat
surface. Always place the goods on
the middle of the scales.
Closed scales are suitable for goods
with Ø 5 -12 cm.
Opened scales are suitable for
goods with Ø 9 -18 cm.
Place the goods on the scales and
wait until the corresponding weight is
displayed.

12.2 Tare Function

container. When you remove the container then the negative weight will be displayed,
press TARE and "0" is displayed.

12.3 Selection of the weight and size units

Press the small "UNIT" button at
the back of the device to
interchange the unit between g, oz,
Water ml, Milk ml.
► Before weighing, select the weight unit. During use, it is not possible to change
between the units.

12.4 Switch off

The scales switches off automatically.
Please note
is
Place an empty container on the
scales. The display will show the
weight of the container.
Touch TARE and the display
shows "0" and the weight of the
container is cleared so that you
can weight the content of the
11