Installation; Fixture Assembly & Installation - Lumatek ATS300W PRO Manual De Instrucciones

5. CONTENTS
1x MANUAL
1 X DIMMING CONTROLLER 0-10V
Connects to Signal IN
connector on LED driver

6. INSTALLATION

Warning! Mounting and installing the LED fixture must be in accordance with the applicable local laws and
regulations.
Warning! The installer is responsible for correct and safe installation.
Warning! Ensure the local cabling can support the voltage and current requirements of the LED fixture.
Warning! Avoid coiled cables and keep mains leads separated to help prevent electromagnetic interference.
Warning! Do not connect or disconnect the LED fixture under load.
6.1 Fixture assembly & installation
Warning! Mount the system to something that can hold the weight of the LED fixture.
Attach the metal wire hangers to the mounting hooks on sides of the fixture driver. Hang the fixture in required
position and height. For optimal performance; position fixture 15 – 40cm above plant canopy. Ensure the
fixture is hung horizontally.
1 X 240V POWER
SUPPLY CABLE
(connect to INPUT)
2 X METAL WIRE
HANGERS
(connect to mounting
hooks to hang fixture)
1 X ATS 300W
PRO LED FIXTURE
Includes dimmable &
externally controllable driver