Operation; Energy Saving Tips - Dometic CD 20 Instrucciones De Montaje

CD20, CD30
Please observe the following instructions:
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. 5, page 5.
Key to fig. 5, page 5
Co-ordinate axis
l
∅
Connect your cooling device as directly as possible to the battery terminal or to
an outlet with a fuse rated for at least 15 A (12 V) or 7.5 A (24 V).
➤ Fix the device in place using the screwing holes:
– CD20, see fig. 3, page 4.
– CD30, see fig. 4, page 5.
7

Operation

I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and care" on page 13).
7.1

Energy saving tips

•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
Defrost your cooling device as soon as a layer of ice forms.
•
Avoid unnecessarily low temperatures.
•
Clean the condenser of dirt (dust etc.) at regular intervals.
EN
Meaning
Cable length
Cable cross section
Operation
Unit
m
mm²
11