Selecting The Temperature - Dometic CD 20 Instrucciones De Montaje

Operation
7.2 Switching on the coolbox
➤ Open the coolbox drawer.
➤ To switch on the coolbox, turn the thermostat knob clockwise
(see fig. 2 1, page 3).
✓ The coolbox starts cooling the interior.
I
NOTE
Ensure that the objects placed in the coolbox are suitable for
cooling/warming to the selected temperature.
7.3

Selecting the temperature

The switch on the thermostat (see fig. 2 1, page 3) displays the selected
temperature.
Switch position
MAX
MIN
➤ If you wish to set the temperature to cooling, turn the thermostat knob (see
fig. 2 1, page 3), to the desired temperature range.
7.4 Switching off the coolbox
I
NOTE
If you wish to leave the cooling device switched off for a longer period,
clean it and leave the drawer slightly open. This will prevent unpleasant
odours from forming.
➤ Open the coolbox drawer.
➤ To switch off the coolbox, turn the thermostat knob (see fig. 2 1, page 3) to the
"0" position.
✓ The coolbox is switched off.
➤ If you wish to stop using the coolbox, disconnect the connecting cable from the
battery.
12
Temperature range (dependent of ambient temperature)
CD20
approx. –2 °C (28.4 °F) in interior
approx. +12 °C (53.6 °F) in interior
CD20, CD30
CD30
EN