HTW BIBLOCK PLUS A60CGN8PLUS Manual De Usuario página 129

About FOR SERVICEMAN
"FOR SERVICEMAN" is designed for the installer to set
the parameters.
Setting the composition of equipment.
Setting the parameters.
How to go to FOR SERVICEMAN
Go to MENU> FOR SERVICEMAN. Press OK:
FOR SERVICEMAN
Please input the password:
0 0 0
OK ENTER ADJUST
to navigate and press ▼ ▲ to adjust the
Press
numerical value. Press OK. The password is 234, the
following pages will be displayed after putting the
password:
FOR SERVICEMAN
1. DHW MODE SETTING
2. COOL MODE SETTING
3. HEAT MODE SETTING
4. AUTO MODE SETTING
5. TEMP.TYPE SETTING
6. ROOM THERMOSTAT
OK ENTER
FOR SERVICEMAN
7. OTHER HEATING SOURCE
8. HOLIDAY AWAY MODE
9. SERVICE CALL SETTING
10. RESTORE FACTORY SETTINGS
11. TEST RUN
12. SPECIAL FUNCTION
OK ENTER
FOR SERVICEMAN
13. AUTO RESTART
14. POWER INPUT LIMITATION
15. INPUT DEFINE
16. CASCADE SET
17. HMI ADDRESS SET
OK ENTER
Press ▼ ▲ to scroll and use "OK" to enter submenu.
1/3
2/3
SETTING
3/3
48
9.6.1 DHW MODE SETTING
DHW = domestic hot water
Go to MENU> FOR SERVICEMAN> 1.DHW MODE
SETTING. Press OK. The following pages will be
displayed:
1 DHW MODE SETTING
1.1 DHW MODE
1.2 DISINFECT
1.3 DHW PRIORITY
1.4 DHW PUMP
1.5 DHW PRIORITY TIME SET
ADJUST
1 DHW MODE SETTING
1.6 dT5_ON
1.7 dT1S5
1.8 T4DHWMAX
1.9 T4DHWMIN
1.10 t_INTERVAL_DHW
ADJUST
1 DHW MODE SETTING
1.11 dT5_TBH_OFF
1.12 T4_TBH_ON
1.13 t_TBH_DELAY
1.14 T5S_DI
1.15 t_DI HIGHTEMP.
ADJUST
1 DHW MODE SETTING
1.16 t_DI_MAX
1.17 t_DHWHP_RESTRICT
1.18 t_DHWHP_MAX
1.19 DHWPUMP TIME RUN
1.20 PUMP RUNNING TIME
ADJUST
1 DHW MODE SETTING
1.21 DHW PUMP DI RUN
ADJUST
9.6.2 COOL MODE SETTING
Go to MENU> FOR SERVICEMAN> 2.COOL MODE
SETTING. Press OK.
The following pages will be displayed:
1/5
YES
YES
YES
YES
NON
2/5
5 °C
10°C
43°C
-10°C
5 MIN
3/5
5 °C
5 °C
30 MIN
65°C
15MIN
4/5
210 MIN
30 MIN
120 MIN
YES
5 MIN
5/5
NON