User Mode - Samsung DSR 9407 FTA Instrucciones De Uso

TING THE RECEIVER
ting conditions
alter the settings
his menu are
or the "Auto
at your antenna
r dealer.
DiSEqC D, Tone Burst A, Tone Burst B)
option. ("Yes" or "No")
NB or two antennas connected to a 22 kHz
Hz tone switch ("On", "Off" or "Auto") you
or antennas.
em, then you can take advantage of
atellites and
e, FEC and
GB-16
D I G I T A L
All manuals and user guides at all-guides.com
Select from Menu Mode:
"User" mode :
"Installer" mode :

1.2.1 User Mode

Select Driving Mode:
You have an option to choose the positioner's
movement type: Continuous, Step or Time.
Position the antenna with north, south, east
and west and use the
motor. key drives to west,
key drives to north and
If you finished driving of motor, select "Store
current Position." and press
new driving motor.
N N o o t t e e : The level indicated in the "Signal Status" is only for reference.
The signal quality may be adequate even though the level indicated is
not maximum.
Go to Stored Position.
When the stored position is reached then screen displays "Stop",
you can now continue with the further operations.
Select the Calculate Sat Positions to recalculate the satellite position and
S A T E L L I T E R E C E
OPERATING THE RECEIVER
Enables control of basic positioner function
recommended for beginners. General user uses "User" mode.
Complete control of the positioner's full functions
recommended for installers and professional users.
/ , / key to drive
key drives to east,
key drives to south.
key, to reset
GB-17
I V E R
key.