Determining/Selecting The Cell Constant C - wtw Cond 3150i Instrucciones De Operación

Determining/Selecting the cell constant C

C L E L
9 2 5
S/
cm
1/ cm
0 7 4 5
Tref25
ARng
nLF
6
All manuals and user guides at all-guides.com
Determining/Selecting the cell constant C
The cell constant of the conductivity measuring cell can be set to one of the
following values:
-1
0.475 cm
-1
0.100 cm
-1
0.875 cm
Note
The cell constant that should be selected must either be taken from the op-
erating manual of the measuring cell or is printed on the measuring cell.
Procedure for setting up the cell constant:
Press the <CAL> key repeatedly until the
Then press the <RUN/ENTER> key.
Press the <CAL> key repeatedly until the required cell constant appears
in the lower line of the display.
-1
Selection: 0.475 cm
Switch to the measuring mode with <M>.
CELL display appears.
-1 -1
; 0.100 cm ; 0.875 cm
Cond 3150i