Hohem iSteadyPro4 Manual De Usuario página 13

App "Hohem Gimbal" Instruction
Other App Features
1. Gimbal Specs Setting:
A. Following Speed (To adjust the following speed of pan/tilt/roll axis)
B. Joystick Speed (To adjust the rotating speed by control the joystick)
C. Dead Zone (No following movement when the rotate angle
is less than dead area setting)
D. Trim (Adjust the tilt/roll axis in small angle)
E. Joystick Reverse (Reverse the rotation direction by control the
joystick)
F. Motor Options ( To adjust the motor torison of pan/tilt/roll axes, which
is useful to solve the vibrate issue due to lightweight or overweight
action camera)
G. Camera options: enable/disable charging output of gimbal mini USB
port, CAMERA CONTROL OPTIONS.
2. Firmware Upgrade:
The firmware is subject to upgrade without a fixed schedule.
Firmware upgrade is help to optimize the working of gimbal, Please refer
to 'Firmware Upgrade' for more details
3. Calibration:
It requires to calibrate the gimbal only when you notice any kind of not
level or drift on any of the axes, Please refer to 'Calibration' for more
details
EN 09