Hohem iSteadyPro4 Manual De Usuario página 14

Calibration
It requires to calibrate the gimbal if you notice
it is not work properly as below.
1. The pitch angle is not level with the horizontal surface.
2. The roll angle is not parallel to the horizontal surface.
3. The pan axis drifts when the gimbal is on all lock mode.
Calibration Instruction
Method 1: Off-line Calibration
(1) Power on the gimbal, long press the mode button over 6 seconds till the
till the Bluetooth indicator stays on.
(2) Laying the gimbal on a static flat surface without any vibrate. Calibration
is completed once the Bluetooth Indicator flashes twice.
* If the off-line calibrationis is not work, please refer to [Method 2]
Method 2: 6-Side Calibration Via App
Please make sure the gimbal is connected with app via bluetooth
successfully, then enter "Calibration" and follow the instruction in the app
to calibrate the gimbal.
EN 10