Uline H-5048 Manual De Instrucciones página 8

OPERATING ISSUE
There is little or no suction.
Vacuum turns off while in use.
Vacuum has a burning smell.
Does not clean carpet.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 8 OF 24
TROUBLESHOOTING
1. There may be a clog in the hose or wands. If so, take the hose and wands apart and
remove the clog.
2. Open the lid and ensure that the Intercept® Micro Filter is not full, the micro cloth filter
bag is correctly located, and that the flexible ring provides a proper seal when the lid
is closed.
3. Check to make sure pre-motor and side HEPA exhaust filters are clean.
1. The machine may turn off due to overheating. Wait until the vacuum has cooled down.
2. Check to make sure there are no clogs.
1. Check to see if cord is damaged.
1. Be sure hose is secure on cleaner.
2. Check hose, wands and attachment for clogs.
1-800-295-5510
uline.com
RECOMMENDATIONS
0919 IH-5048