Dmx Linking; Control Panel Description - Chauvet Professional COLORADO 2-QUAD ZOOM TOUR Guía De Referencia Rápida

EN

DMX Linking

DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
Passcode
All manuals and user guides at all-guides.com
The COLORado™ 2-Quad Zoom Tour will work with a DMX controller using
a regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
The COLORado™ 2-Quad Zoom Tour uses a regular DMX data connection for
its DMX personalities: TOUR, TR16, STD.Y, ARC.1, AR1.D, ARC.2,
AR2.D, AR2.S, AR2.Z, and HSV. See the User Manual to connect and
configure for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16 and
STD.Y, personalities, be sure that both dimming curves in SET > DIM and
SET > CURV are set to OFF.
The COLORado™ 2-Quad Zoom Tour uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Overhead Mounting
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the
<ENTER>
currently selected value into the selected function
Navigates upwards through the menu list and
<UP>
increases the numeric value when in a function
Navigates downwards through the menu list and
<DOWN>
decreases the numeric value when in a function
After being prompted, enter the following passcode by pressing:
·
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
COLORado™ 2-Quad Zoom Tour QRG
Mounting Clamp
(such as CLP-15 or
CLP-15N from
CHAUVET®)
Safety Cable
(such as CH-05
from CHAUVET®)
Secure the safety cable using
the passageway on the back
of the product.
Function
3
Floor Mounting