Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Fax +1 305 430 9692
DECALCIFICATION AND CLEANING
•
Before cleaning, turn off the appliance, unplug it and let it cool
down.
•
The filter, filter holder, carafe and carafe lid can be cleaned in a
solution of warm water and mild liquid soap.
•
The coffee maker can be cleaned using a damp cloth. Never
immerse the body of your coffee maker in water or any other
liquid. Never use abrasive cleaning products or solvents.
•
Decalcifying the coffee maker prolongs its life span. For
decalcification only use products especially made for the
decalcification of coffee makers.
•
Never use a dishwasher to clean the jug. Just clean it in warm
soapy water
If the water in your region is hard, decalcify your coffee maker every
7 to 10 uses as follows:
•
Pour 3 cups of white vinegar or decalcifying solution (special for
coffee maker) into the water tank and fill to the maximum level
with water.
•
Place the carafe on the warming plate.
•
Plug in the coffee maker and press the power button.
•
When the water tank has emptied, switch off the coffee maker
and empty the carafe.
•
Rinse the coffee maker two or three times by repeating the
above process using cold water only, or as indicated by the
manufacturer of the decalcifying solution.
PRACTICAL HINTS
When you notice that the coffee making process is longer than it
should be, it is probably time to decalcify the appliance. Do not wait
until the situation gets worse. The decalcifying frequency depends
on the amount of lime in the water and therefore can be different
from family to family. Therefore it is important to pay attention to this.
A good maintenance of your appliance will prolong its lifespan.
Guarantee claims will not be accepted for the replacement of a
heating element full of scale.
Copies of the I/B. Please reproduce them without any
changes
except
under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
6
Assembly page 6/24
special
instruction
from
Team
Print only
USK CM 32205 CM 32849 - 120501
Publicidad
Tabla de contenido
