Shutting Down - BE 4.75HP Manual De Operación

SHUTTING DOWN

SHUT DOWN PROCEDURE (ALL UNITS)
OFF
Observe the below steps, and take care to follow them exactly as shown.
Steps will become second nature after repeated use.
Follow the step below that corresponds with the unit that you are using:
1
4.75 HP, 5 HP, 6.5 HP, or 13 HP Unit.
4
.75
HP
Slide Throttle Control
(RIGHT) to "STOP"
position.
6.5 13
Slide Throttle Control
HP HP
(RIGHT) to "STOP"
position.
2
Turn off Water
Source.
4
Disconnect garden
hose from Inlet Gar-
den Hose attachment
on pump.
Your pressure washer is now Shut Down. See "Winterizing your Pressure
Washer" for storage instructions.
10
FOR SERVICE: 1-866-850-6662 & WWW.BEPRESSURE.COM
All manuals and user guides at all-guides.com
5
HP
Slide Throttle Control
(DOWN) to "STOP"
position.
6.5 13
HP HP
Turn ON/OFF switch
to "OFF".
3
Pull gun trigger to re-
lease water pressure
from system.
5
Disconnect high pres-
sure hose from quick
connection on Outlet
of pump.