Problems When Using The Sd-80 - Edirol STUDIOCANVAS SD-80 Guía De Iniciación

Resolución de problemas
9. Si aparece el controlador USB de EDIROL SD-80 con un signo "!" amarillo o un signo "?"
rojo al lado, elimínelo del mismo modo.
10. Cuando haya terminado de eliminar los dispositivos no deseados, haga clic en [Aceptar] en el
cuadro de diálogo Propiedades del sistema.
11. Apague el SD-80 y elimine el controlador. "Deleting the driver"(pág. 179).
12. Reinicie Windows. Acto seguido, vuelva a instalar el controlador.
(->"Instalación y configuración del controlador (Windows)"(pág. 149))
* Si el problema persiste después de haber realizado los pasos anteriores, consulte también el archivo Léame
del controlador USB. El archivo Léame se encuentra en el CD-ROM.

Problems when using the SD-80

Operating system becomes unstable
• Operation becomes unstable when the computer is started up with the SD-80 already
connected
Please start up your computer with the SD-80 disconnected, and then connect the SD-80. On a
computer that uses a USB keyboard, starting up the computer with the SD-80 already connected
may cause operation to become unstable. In this case, start up the computer with the SD-80
disconnected, and then connect the SD-80.
No sound
• Have you specified the MIDI data output destination for your operating system?
You must specify the SD-80 as the audio data output destination for your computer.For details on
how to make this setting, refer to Settings and checking.
(Windows,"Destinos de entrada y salida MIDI"(pág. 161)/
Macintosh, "Configuración de OMS"(pág. 167), "Configuración de FreeMIDI"(pág. 170))
• Are you running multiple applications?
If multiple applications are running simultaneously, an error message may appear. If this occurs,
click [OK] and exit the other applications.
Even if an application window is closed, it is still running if it appears in the taskbar. Be sure to exit
unneeded applications displayed in the taskbar.
• Was the driver installed correctly?
In order for you to play back audio data via the SD-80, the driver must be installed. For installation and
settings, refer to "Installing & Setting Up the Driver" (Windows, pág. 149 / Macintosh, pág. 165).
• Is your audio playback equipment (e.g., stereo system) connected correctly?
On its own, the SD-80 is not capable of producing sound that you can hear. Make sure that the USB
connector of your computer is connected to the SD-80 by a USB cable. Make sure that the SD-80's
OUTPUT 1 (audio output 1) jacks are connected by audio cables to the input jacks of your audio playback
equipment. For details on connections, refer to "Conexiones con el equipo de audio"(pág. 148).
• Is the power of your audio equipment turned on?
Make sure that the power is turned on for your audio equipment (e.g., stereo) and the SD-80.
176