Check Whether There Is Sound - Edirol STUDIOCANVAS SD-80 Guía De Iniciación

Installing & Setting Up the Driver (Windows)

Check whether there is sound

Next, play back the sample data to verify that the driver installation and
settings were performed correctly.
Playing back the sample data (MIDI)
Here we will use standard Windows functionality to play back the sample
data (MIDI). The sample data is found on the CD-ROM.
1
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
2
From the DemoSong\Additional folder of the CD-ROM, drag
01ORCH(.MID) to your desktop to copy it.
fig.listen98-1m_50
3
Right-click the copied file 01ORCH(.MID), and select
Properties (Play for Windows XP/2000/Me).
fig.listen98-2m_30
4
Play back the sample data.
Click the Preview tab, and then
click the button.
Was the sample data played back?
If it was played back correctly, this means that the computer and the SD-80
are connected correctly, and that the drivers have been installed correctly.
24
Use of the demo song
supplied with this product
for any purpose other than
private, personal
enjoyment without the
permission of the
copyright holder is
prohibited by law.
Additionally, this data
must not be copied, nor
used in a secondary
copyrighted work without
the permission of the
copyright holder.
What you actually see on
your computer screen may
be different, depending on
your computing
environment and the
operating system you're
using.
If it did not play back
correctly, refer to
Troubleshooting (p. 32) to
determine the reason. This
section contains
information on how to
solve problems such as no
sound, or failure to play
back correctly.