Settings - Edirol STUDIOCANVAS SD-80 Guía De Iniciación

Settings

MIDI input and output destinations
Windows XP/2000/Me users
1
Open Control Panel.
Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel.
Windows XP
Click the Windows start button, and from the menu that appears, select
Control Panel.
2
Open the Sounds and Audio Devices Properties dialog box (or in
Windows 2000/Me, Sounds and Multimedia Properties).
Windows XP
In "Pick a category", click "Sound, Speech, and Audio Devices". Next, in
"or pick a Control Panel icon", click the sounds and Audio Devices icon.
Windows 2000/Me
In Control Panel, double-click the Sounds and Multimedia icon to open
the "Sounds and Multimedia Properties" dialog box.
3
Click the Audio tab.
fig.2-28_30
4
For MIDI music playback, click the
located at the right of [Default device] (or
in Windows 2000/Me, [Preferred
device]), and select the following from
the list that appears.
1:EDIROL SD-80 PARTA
5
Close the Sounds and Audio Devices
Properties dialog box.
Click OK to complete the settings.
Proceed to the next section.
•Windows XP users ....................................................... p. 23
•Windows 2000/Me users ............................................. p. 24
Installing & Setting Up the Driver (Windows)
Depending on how your
system is set up, the
Sounds and Audio
Devices icon may be
displayed directly in the
Control Panel (the Classic
display). In this case,
double-click the Sounds
and Audio Devices icon.
Additional information
about the ports
SD-80 MIDI OUT1:
Sends/receives data from
the SD-80's MIDI OUT
1 connectors
SD-80 MIDI OUT2:
Sends/receives data from
the SD-80's MIDI OUT
2 connectors
SD-80 PART A:
Sends/receives data for
SD-80 part group A
SD-80 PART B:
Sends/receives data for
SD-80 part group B
21