Oven Door - Crosley XGBS400 Manual Del Propietário

Estufas a gas con horno simple
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Oven Door

The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle.
If improperly removed, oven door hinges may suddenly close and can cause personal injury to
WARNING
appendages near the hinge. Follow instructions below to avoid a risk of injury when removing and
re-installing the oven door.
Removing the Door:
1. Fully open the oven door.
2. On each hinge, slide the hinge lock up, making sure it
snaps into its fully raised position.
3. Firmly grasp both sides of the door near the handle.
4. Close the door until the top of the door is
approximately 3" from the range frame.
5. Lift door up and away from the range until both hinge
arms are clear of the slots in the range frame.
Replacing the Door:
1. Firmly grasp both sides of the door near the handle.
2. With the door at the same angle as the removal
position, rest the notch in the bottom of the left hinge
arm on the bottom edge of the left hinge slot. The
notch in the hinge arm must be fully seated onto the
bottom of the slot. Repeat for the right side.
3. Fully open the door. If the door will not fully open, the
hinge arms are not seated correctly. Lift the door off
the range and repeat Step 2.
4. Push the hinge locks down to the locked position.
5. Close the oven door.
26
Pull hinge locks up to unlock
Notch
Removal position
Push hinge locks
down to lock
49-2000228 Rev. 2

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido