Status Led Guide; Fitting The Mounting Bracket; Owner Information - Monitor Audio IA40-3 Manual Del Propietário

Status LED Guide

Standby/ Sleep: Red
Power On/ No Signal: White
Analogue/ PCM: Green
Dolby: Purple
Bluetooth Connected: Blue
Bluetooth Pairing: White Blinking
IR Learning Mode: Purple Blinking
Time-out to Sleep Selected: Blue Blinking
Time-out to Standby Selected: Green Blinking

Fitting the Mounting Bracket

The IA40-3 is supplied with 3 mounting brackets, 2
for fitting to the product and a spare. The brackets
are attached using 4 supplied screws. Fit these
through the bracket holes shown into the inserts on
the base of the IA40-3, locations are circled in this
illustration.
Warranty
Both the craftsmanship and the performance of this
product is covered by the manufacturer's warranty
against manufacturing defects provided that the
product was supplied by an authorised Monitor
Audio retailer under the consumer sale agreement.
For the period of cover please refer to the product
page on our website: monitoraudio.com for the
product you have purchased.
When purchasing Monitor Audio products, please
keep your receipt of purchase safe, as this validates
your warranty.
trademarks owned by Bluetooth SIG, Inc.and any
use of such marks by MONITOR AUDIO Ltd. is
under license. Other trademarks and trade names
are those of their respective owners.
The Bluetooth word mark
and logos are registered
monitoraudio.com monitoraudio.com
Laboratories. Dolby, Dolby Audio, and the double-D
symbol are trademarks of Dolby Laboratories.

Owner Information

Product Details
Product Serial No:
Date of Purchase:
Dealer Details
Dealer Name:
Address:
Post code:
E-mail address:
FCC & IC Radiation Exposure Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada's licence-exempt
RSS(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
Manufactured under
license from Dolby
3 3