All manuals and user guides at all-guides.com
Menu list
Menu
Item
Viewing Mode
Backlight, Contrast,
Brightness, Colour,
Sharpness
Tint
Colour Balance
P-NR
3D-COMB
Colour Matrix
AV Colour System
16:9 Overscan
Adjustments / Configurations (alternatives)
Selects your favourite picture mode for each input.
[Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game]
[Dynamic]:
Improves contrast and sharpness for viewing in a bright room.
[Normal]:
Normal use for viewing in a normal lighting condition.
[Cinema]:
Improves the performance of contrast, black and colour reproduction for
watching movies in a darkened room.
[True Cinema]:
Reproduces the original image quality precisely without any revision.
[Game]:
Provides suitable images for fast response signal when playing games.
●
Not valid on TV mode
●
To display a continuous record of time spent using [Game] mode
[Playing Time Display] (p. 17)
In each viewing mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint],
[Colour Balance], [P-NR], and [3D-COMB] can be adjusted and stored for each
input.
Increases or decreases the levels of these options according to your personal
preference.
Adjusts the picture hue to suit your taste.
●
For NTSC signal reception
Sets the overall colour tone of the picture.
[Cool] / [Normal] / [Warm]
Picture Noise Reduction
Reduces unwanted picture noise and flicker noise in the contoured parts of a
picture. [Off] / [Min] / [Mid] / [Max]
Makes still or slow moving pictures more vivid. [Off] / [On]
●
Occasionally, while viewing still or slow moving pictures, colour patterning
may be seen. Set to [On] to display sharper and more accurate colours.
●
For PAL / NTSC signal reception in TV mode or from composite
Selects image resolution of component-connected or HDMI-connected devices.
●
Only for HDMI / YPbPr input source
●
Only used with 480p or 576p video signal
Selects optional colour system based on video signals in AV mode:
[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
●
For AV input source only.
Selects the screen area displaying the image. [Off] / [On]
[On]:
Enlarges the image to hide the edge of the image.
[Off]:
Displays the image in the original size.
●
Sets to [On] if noise is generated on the edge of the screen.
●
This function is available when aspect is set to [16:9].
●
This function can be memorised separately for SD (Standard definition) and
HD (High definition) signals.
13