Remote Control - Jocel JACP-010 Manual De Funcionamento

REMOTE CONTROL

The provided remote control operates all of the functions of the unit. The remote control
uses one lithium battery (provided).Install the battery before using the remote control.
Here are some things you should know about operating the unit with the remote
controller.
1. "ON/OFF" button
to stop the unit operation.
2. TIMER ON / OFF button :press these button to preset time on/time off.
3. Mode (MODO) select button: COOL/FAN/DEHUM/HEAT to choose the appropriate
operating mode.
4. HI (MAX) / MID (MEDIO) /LOW (MIN) button: Select the desired fan speed setting.
Speed buttons will be no effect under dehumidify mode.
5. "+" & "-" button: Press these buttons to adjust temperature.
6. "SWING" button: Press this button to oscillate the louvers or stop oscillation.
7. Sleep function
mode & heating mode. Steps as below:
a. The portable air condition will enter into sleep function when y o u press sleep
button of remote control.
b. If you set sleep function under cooling mode, it would been risen 1ºC one hour
later, and it would been risen 2ºC two hours later. After that it wouldn't been rose..
c. If you set sleep function under heating mode, it would been reduced 1ºC one hour
later, and it would been reduced 2ºC two hour later. After that it wouldn't been
reduced.
All manuals and user guides at all-guides.com
: Push this button to start the unit operation,push the button again
: You can choose sleep function with remote control under cooling
-33-