Operation; Cleaning / Maintenance; Cleaning & Maintenance - Lacor PRO 69363 Instrucciones De Uso Y Mantenimiento

1.- After correctly installing the toaster on a flat, hard surface, plug the power cord into a
230V / 50Hz power outlet.
2.- Place the bread you wish to toast onto the grill (3) leaving at least a 1cm gap between each
piece.
3.- Turn the timer (1) clockwise and select the required time which will determine how much the
bread is toasted.
4.- The blue indicator light (2) will come on and the heating elements (6) will begin to heat up.
5.- Once the time selected has passed, the toaster will emit a "beep" indicating the end of the
cycle.
NOTE: Bread can burn; check on it occasionally and turn it over if necessary.
6.- If you wish to CANCEL the process, turn the timer anti-clockwise to its starting position at any
time.
7.- Crumbs and leftovers will be deposited in the crumb tray (4). Pull it out to remove and clean it
after each use.
8.- If you wish to move the toaster, use the side handles (5) designed for this purpose.
NOTE: Thanks to its design, the toaster can be used for all types of sliced bread, all types
of bread and similar products such as croissants and pastries.
1.- ALWAYS store the toaster in a dry place which is free from moisture. To save space,
remember to wind the cord round the support (8) designed for this purpose.
2.- Do not attempt to toast sandwiches, or products that contain fat, butter, cheese, or jam.
These may leak in the interior of the toaster and burn, affecting the operation and smell
of the toaster.
3.- Before beginning the cleaning of the appliance, make sure it is unplugged.
4.- Do not use products that contain chlorine or bleach when cleaning, as they may permanently
damage the stainless steel surfaces. Use a damp cloth or chamois and then make sure to
dry the toaster properly.
5.- After several uses, remove and clean the crumb collection tray. Return it to its original
position for future use.
6.- In the event of bread becoming stuck, unplug the toaster and wait until it cools down. Then
remove the bread, without using sharp, metallic objects.
7.- Insert slices of bread before starting the toaster. Do not start the toaster when empty, as this
will affect the useful life of the toaster.
30

OPERATION

CLEANING / MAINTENANCE