SPC BAAMBA GYRO PRO SUCTION 4400 Manual De Instrucciones página 19

INDEX
1. Parts and components
1.1 Robot
1.2 Parts of the robot
1.3 Charging base
1.4 Water tank
1.5 Dust box
1.6 Remote control
2. Product installation
2.1 First use
2.2 Placing the water tank
3. Instructions for use
3.1 Turning it on/ off
3.2 Operating modes
3.3 Recharge
3.4 Manual mode
3.5 Wall follow
3.6 Mop
3.7 Spiral
3.8 Pause
3.9 Resting
3.10 Error
3.11 Filling the water tank or emptying the
compartment when cleaning
3.12 Suction and scrubbing modes
3.13 Specify the area for cleaning
3.14 Programmed cleaning
3.15 Indicator lights
3.16 Configuring the network and updating
the firmware
4. Maintenance
4.1 Dust box
4.2 Water tank
4.3 Central brush
4.4 Lateral brush
4.5 Anti-fall sensors and charging terminals
5. Safety instructions
5.1 Safety measures
5.2 Safety
5.3 Information about the battery
5.4 Surfaces where it can be used
5.5 Exceptions
6. Troubleshooting and frequently asked
questions
7. Technical specifications
EN