EN
5. SAFETY INSTRUCTIONS
5.1 SAFETY MEASURES
WARNING
•
Only use the original adaptor, battery and
charging base. Using different ones may
damage the smart cleaning robot and may
cause a fire through a short circuit and the
high voltage.
•
If you see that the main casing or
accessories are damaged, do not use the
smart cleaning robot and contact our
after-sales service. Removing the main
casing, repairing or reassembling the smart
cleaning robot will cancel the device's
warranty period.
•
Unplug the smart cleaning robot before
doing any maintenance work.
•
Do not touch the battery terminal or the
smart cleaning robot with wet hands. This
may cause an electrical shock.
•
If the main cable is damaged, contact SPC
and wait for a professional to replace it to
avoid damage.
•
The robot cannot go down steps; its anti-fall
sensors will prevent possible accidents, as
long as they are cleaned on a regular basis.
Take special care when there is a risk of
falling to the lower floor and there are
people present. Use the magnetic tape to
create virtual walls.
•
Do not place the smart cleaning robot near
sources of heat or inflammable, explosive or
corrosive materials.
•
To avoid injuries, avoid contact with the
brushes, wheels... do not put clothes on it or
any part of your body (hair, fingers, etc.).