Chapin 80008N Montaje / Instrucciones De Funcionamiento / Piezas página 3

Baffle Assembly
Step 1:
Install carriage bolts through pre-drilled holes
in hopper. Assemble carriage bolts to hopper
such that bolt heads remain inside hopper.
Step 3:
Install front baffle.
Note: To set at desired height loosen nut and slide baffle up or down. Retighten nut.
This model can be used as for all season use by sliding baffles out of the way or by installing the provided
plugs in the pre-drilled holes.
Auger Assembly
Install auger to impeller shaft. Attach
with R-clip.
All manuals and user guides at all-guides.com
Step 2:
Install side baffle and tighten with thumb nut.
Repeat on opposite side.
Assembled with baffles up