Safe Guard Fu Nc T Ion; Over Current Protection - BE QUIET! DARK POWER PRO Manual Del Usuario

1 0 0 0 W & 1 2 0 0 W
6 . S A F E G U A R D F U N C T I O N
All be quiet! power supplys are equipped with numerous safeguard functions. They protect the user as well as the
power supply and the connected components. When one of these safeguards is triggered, then a rebooting or
deactivation of the system is the consequential result. Should this happen, the PC should be immediately checked
for possible errors. In order to systematically detect such errors, please read the chapter „Troubleshooting" on the
following pages. The Dark Power PRO series disposes of the following safety functions:

OVER CURRENT PROTECTION

deactivates
UVP (UNDER VOLTAGE PROTECTION)
This safeguard triggers when the voltage in the circuits falls below a certain limit. In this case, the power supply is
then automatically deactivated.
OVP (OVER VOLTAGE PROTECTION)
The over voltage safeguard is triggered when the voltage in the circuits is too high and the power supply deactivates.
SCP (SHORT CIRCUIT FUSE)
The safeguard during a short circuit in the secondary section of the power supply prevents a defect to the power
supply and its components.
600mm 600mm
HDD HDD
SATA SATA
SATA SATA
500mm 500mm
600mm 600mm
33
150mm 150mm 150mm 150mm
150mm 150mm
RPM control RPM control
24/20 pin. 24/20 pin.
maincable maincable
PCIe 5 PCIe 5
SATA SATA SATA SATA
HDD HDD
HDD HDD HDD HDD HDD HDD
HDD HDD HDD HDD HDD HDD
HDD HDD HDD HDD HDD HDD
SATA SATA
SATA SATA
SATA SATA
SATA SATA
SATA SATA SATA SATA
PCIe 1 PCIe 1
SLI / Cross Fire SLI / Cross Fire
PCIe 2 PCIe 2
Quad SLI / Cross Fire Quad SLI / Cross Fire
PCIe 3 PCIe 3
SLI / Cross Fire SLI / Cross Fire
PCIe 4 PCIe 4
P8 connector P8 connector
12V P4 connector 12V P4 connector
MB connector MB connector
EPS 6pin EPS 6pin
Fan connectors Fan connectors
150mm 150mm
150mm 150mm
HDD HDD
FDD FDD
HDD HDD
HDD HDD
FDD FDD
SATA SATA
SATA SATA